Power2Max NGeco MTB Power Meter - SRAM / Praxis
WARNING
This product Contains a Button/Coin Battery. A lithium battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.
The NG MTB SRAM single power meter spider (Boost) is the power meter for all mountainbikers who already use a direct mount SRAM single crank set or a modular SRAM crank set with a Q-factor of 168mm (these cranks use 3 bolts to tighten the spider). This powermeter also works with Truvativ cranksets.
Please note, that the powermeter replaces the direct mount chainring. You will need a new SRAM compatible chainring with BCD 104.
The NGeco MTB SRAM single power meter (boost) spider is for the boost chainline.
- SPECIFICATIONS -
Physical
- Weight: 120g
- Fitment options (BCD) - 104
- Chainline: BOOST Single
- Boost Single to Standard - requires the Single Boost to Standard Adapter (ZB-SAX-00104-M01.SBNG)
- Boost Double to Standard - requires the Double Boost to Standard Adapter (ZB-SAX-10464-M02.D0NG)
- Water Resistant: yes
Battery
- Type: CR2450 coin cell (replaceable)
- Life: up to 300 hrs
Data
- Metrics: power, cadence
- Power Accuracy: +/- 2%
- Torque: 0 - 250 Nm
- Power: 10 - 2999 W
- Cadence: 20 - 250 RPM
- Data Transmission: ANT+, BLE
- Active temperature compensation: yes
- Calibration: automatic zero-point adjustment (no user calibration required!)
Other
- Manufacturer's Warranty: 5 years (NG model) / 2 years (NGeco model)
- INCLUDES -
- Powermeter
- Silicon cover
- Quickstart guide
POWER2MAX WARRANTY INFORMATION
POWER2MAX guarantee their products to be free of manufacture defects, to the original purchaser, for 2 years.
This warranty does NOT cover normal wear and tear, incorrect installation, modification or products which have been otherwise tampered with, and crashed products.
All POWER2MAX products must be assessed by the manufacturer prior to warranty decisions being made.Dealers are not authorized to replace POWER2MAX products without prior approval or evaluation.If you have a POWER2MAX product that you believe should be considered for warranty, please take it back to the retailer you purchased from with your dated receipt – OR – contact POWER2MAX directly via their support page. https://www.power2max.com/en/warranty/
For more information and installation instructions, please refer to the following; https://www.power2max.com/en/faqs/
Start a warranty process
| Select model |
