Home///NGeco

Power2Max NGeco Road Power Meter - Rotor 3D+/30

$ 1099.00
NZD
SKULM-NER-ROT30-001.110S
Storelocator
Description
Warranty

 

WARNING

This product Contains a Button/Coin Battery.  A lithium battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body.  Keep batteries out of reach of children.  If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention.

 

The NGeco Road Rotor 3D+ power meter spider is the power meter for all cyclist who already use a Rotor 3D+, 3D30 or 3Dflow crank set.

With the 110 4-S version of the powermeter, existing Shimano Road 11-speed and 12-speed chainrings can be used, and thus shifting performance is maintained. 

NOT SURE WHICH P2M POWER METER FOR ROAD IS RIGHT FOR YOU?
Check this guide - https://www.power2max.com/en/p2m-road-powermeter/

- SPECIFICATIONS -


Physical

  • Weight: 153 / 154 / 165 g (110 / 110-4S / 130)
  • Fitment options (BCD) - 110, 130
  • Water Resistant: yes

Battery

  • Type: CR2450 coin cell (replaceable)
  • Life: up to 300 hrs

Data

  • Metrics: power, cadence
  • Power Accuracy:  +/- 2%
  • Torque: 0 - 250 Nm
  • Power: 10 - 2999 W
  • Cadence: 20 - 250 RPM
  • Data Transmission: ANT+, BLE
  • Active temperature compensation: yes
  • Calibration: automatic zero-point adjustment (no user calibration required!)

Compatibility

  • Crankset: a ROTOR 3D+ crankset is needed
  • Fitment: recommend Loctite 243 or similar threadlocker
  • Installation: To mount the right arm to the powermeter, you will need the lockring tool for ROTOR 3D+, 3D30, 3DF, 2D and FLOW cranks (ZB-SAX-WZFSA-K01.0000)

Other

  • Manufacturer's Warranty: 5 years (NG model) / 2 years (NGeco model)

 

- INCLUDES - 

  • Powermeter
  • Silicon cover
  • Quickstart guide

 

POWER2MAX WARRANTY INFORMATION


POWER2MAX guarantee their products to be free of manufacture defects, to the original purchaser, for 2 years.

This warranty does NOT cover normal wear and tear, incorrect installation, modification or products which have been otherwise tampered with, and crashed products.

All POWER2MAX products must be assessed by the manufacturer prior to warranty decisions being made.Dealers are not authorized to replace POWER2MAX products without prior approval or evaluation.If you have a POWER2MAX product that you believe should be considered for warranty, please take it back to the retailer you purchased from with your dated receipt – OR – contact POWER2MAX directly via their support page. https://www.power2max.com/en/warranty/

For more information and installation instructions, please refer to the following; https://www.power2max.com/en/faqs/



Start a warranty process
Select model


Can't find what you are looking for?
Check out our Helpdesk for more products.